LHI FPV Mini Robocat Carbon-270 4-Achsen-Quadcopter Race Copter Rahmen Kit ARF + MT2204 2300KV Motor + Simonk 12A ESC + 6030 CF Propeller Prop

September 20, 2016 - Comment

Simonk-12A ESC Based on Simon K firmware, further optimized to the perfect drive performance. Low-voltage protection, over-heat protection and self-check functions. Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference. Parameters of the ESC can be set via program card or transmitter. Throttle range can be set to be

Simonk-12A ESC
Based on Simon K firmware, further optimized to the perfect drive performance.
Low-voltage protection, over-heat protection and self-check functions.
Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
Parameters of the ESC can be set via program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC. Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
Continuous Current: 12A
Burst current (10S): 15A
Li-xx Battery (cell): 2-3
Dimension (L*W*H): 25mm x 20mm x 7mm
Weight wires Included: 9
BEC Mode: Linear
BEC Output: 1A/5V
Programmable: Yes
MT2204 2300KV Motor

Features:
1. Low CG design, ligth weight design, longer flight duration
2. Factory has made dynamic balance test for each motor
3. Integreated processing between prop mount holder and motor cap
4. Adopts Japan NMB bearing, with low noise and longer lifetime
5. Adopts Japan 0.2mm spindle, with high efficiency and low heat
Specification:
Franmework: 12N14P
KV: 2300
Length: 32.2mm
Diameter: 27.9mm
Lipo battery: 2-3S
Max. Thrust: 440g
Prop suggest: 5-6 inch
Weight: 25g
Suitable for: 250mm wheelbase mini
quadcopter, light weight fixed-wing copter, indoor 3D airplane
1 x 270mm Carbon Fiber 4 Axis Mini Quadcopter
4 x MT2204 2300KV Multicopter Motor
4 x Simonk 12A ESC
4 x 6*3 6030 Carbon Fiber Propeller(2pcs CW + 2 PCS CCW)
100% Brand New

Product Features

  • Robocat mini frame Carbon Fiber Quadcopter Frame with MT2204 Motors & 12A ESC & 6030 Prop
  • Main material:Pure carbon fiber
  • With rubber damper to decrease vibration during flight
  • Aluminum alloy spacer, light weight, reliable
  • Note: All the rubber damper and screws, spacer are in random color.

Comments

Write a comment

*